You are here: irt.org | RFCs | RFC5105 [ previous next ]
Network Working Group O. Lendl
Request for Comments: 5105 enum.at
Category: Standards Track December 2007
ENUM Validation Token Format Definition
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Abstract
An ENUM domain name is tightly coupled with the underlying E.164
number. The process of verifying whether the Registrant of an ENUM
domain name is identical to the Assignee of the corresponding E.164
number is commonly called "validation". This document describes a
signed XML data format -- the Validation Token -- with which
Validation Entities can convey successful completion of a validation
procedure in a secure fashion.
Table of Contents
1. Introduction ....................................................2
2. Data Requirements ...............................................2
3. Digital Signature ...............................................3
4. Field Descriptions ..............................................4
4.1. The <validation> Element ...................................4
4.2. The <tokendata> Element ....................................5
5. Examples ........................................................6
5.1. Unsigned Token without Registrant Information ..............6
5.2. Signed Token ...............................................6
6. Formal Syntax ...................................................8
6.1. Token Core Schema ..........................................9
6.2. Token Data Schema .........................................10
7. Other Applications of the Token Concept ........................12
8. IANA Considerations ............................................12
9. Security Considerations ........................................13
10. Acknowledgements ..............................................14
11. References ....................................................14
11.1. Normative References .....................................14
11.2. Informative References ...................................15
Lendl Standards Track [Page 1]
RFC 5105 ENUM Validation Token December 2007 1. Introduction In the case where an ENUM (E.164 Number Mapping [1]) domain name corresponds to an existing E.164 number [2], the delegation of this domain needs to be authorized by the Assignee of the corresponding E.164 number. In the role model described in [15], the entity that performs this check is called the Validation Entity (VE). By conveying an ENUM Validation Token -- a signed XML document -- to the Registry, a VE certifies that delegation requirements have been met and are current. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [3]. 2. Data Requirements In this model, the Token is the only piece of data passed from the VE to the Registry. Therefore, the Token needs to contain at least as much information as the Registry requires to grant the delegation of the requested ENUM domain according to its registration policy. As such, the Registry will need confirmation that: o the Token was created by an accredited VE, o the Token's duration of validity conforms to the policy, o the validation procedure employed has met minimum requirements as set forth by policy, o and that the Token is protected against tampering and replay attacks. Beyond such mandatory information, the Token may optionally include number holder information, in particular, to simplify future revalidations. For example, if initial validation requires the steps "Check the identity of the Registrant" and "Check the ownership of an E.164 number", then a later revalidation only needs to re-check the ownership as the identity of the Registrant does not change. As the Token will be included (see e.g., [16]) in XML-based Registry/ Registrar protocols like the Extensible Provisioning Protocol (EPP) [13], it is a natural choice to use XML to encode Validation Tokens. Lendl Standards Track [Page 2]
RFC 5105 ENUM Validation Token December 2007 3. Digital Signature According to the architecture model the propriety of an ENUM delegation depends on the trust relationship between the Registry and the VE. In general, an untrusted link between the Registry and VE should be assumed (for instance, the Token is passed along with the registration request by a Registrar, who might have no role in asserting the right-to-use). Therefore, the Token must be protected against forgery, tampering, and replay-attacks. A digital signature on the token: o asserts that the token was indeed generated by the indicated VE (authenticity). o guarantees that the token was not tampered with in transit (integrity). o enables auditing the validation process (non-repudiation). The cryptographic signature on the token follows RFC 3275 (XML-DSIG [4]). As tokens might be transmitted as part of an already XML based protocol, the exclusive XML canonicalization [9] MUST be used. This transform guarantees that namespace declarations inherited from the surrounding XML do not invalidate the signature. In order to make the signature an integral part of the token, the "enveloped"-signature mode is employed. The signature covers all information contained in the Token. XML-DSIG offers a number of cryptographic algorithms for digesting and signing documents and recommends SHA1/RSA-SHA1. Recent advances in cryptanalysis have cast doubt on the security of SHA1, thus rendering this recommendation obsolete (see e.g., the Security Considerations of [14]). RFC 4051 [5] defines how additional algorithms can be used with XML-DSIG. Validation Entities MUST be able to sign tokens according to XML-DSIG, MUST support RSA-SHA1 and RSA-SHA256 [5], MUST support RSA key sizes of 1024 and 2048 bits, and MUST be able to embed X.509 [10] certificates. The Registry MUST define which signature algorithms and key sizes it will accept in Validation Tokens as part of its local policy. The choice of a RSA-based signature does not require a public key infrastructure. Whether the Registry acts as a certification authority, accepts certs from a public certification authority, or only accepts pre-registered keys is a local policy choice. Lendl Standards Track [Page 3]
RFC 5105 ENUM Validation Token December 2007 4. Field Descriptions The Validation Token is structured into three parts: the basic validation information, additional information about the Registrant, and the digital signature. The XML schema can be found in Section 6. 4.1. The <validation> Element A token MUST contain a <validation> element that contains the following: o A single validation "serial" attribute identifying a validation token for a certain VE. It must be unique per VE. o A single <E164Number> element containing the underlying E.164 number in fully qualified (international) format. o An optional <lastE164Number> element. If present, it indicates that the whole number block starting with <E164Number> up to and including <lastE164Number> has been validated. To avoid ambiguity, both numbers MUST be of the same length. o A single <validationEntityID> element identifying the VE. o A single <registrarID> element identifying the Registrar on whose behalf the validation was performed. o A single <methodID> element identifying the method used by the VE for validation. o A single <executionDate> attribute containing the date of validation formatted as "full-date" according to RFC 3339 [6]. o An optional <expirationDate> attribute marking the expiration date of the validation token formatted as "full-date" according to RFC 3339. The Registry will automatically revoke the delegation at this date unless a new Token has been submitted that extends the lifetime of the validation. A missing <expirationDate> indicates infinite validity of the Token. The format and the uniqueness-constraints of these IDs is left to the local policy of the Registry. Lendl Standards Track [Page 4]
RFC 5105 ENUM Validation Token December 2007 4.2. The <tokendata> Element A token may contain a <tokendata> section containing information about the number holder, consisting of the following elements: o A single <organization> element containing the full name of the organization to which the Registrant is affiliated. o A single <commercialregisternumber> element. If the Registrant is a company, then this field can be used to uniquely identify this company by its official registration number within the local country. The interpretation of this field is thus country-specific. o A single <title> element. o A single <firstname> element. o A single <lastname> element. o A single <address> section containing the following elements: * A single optional <streetName> * A single optional <houseNumber> * A single optional <postalCode> * A single optional <locality> * A single optional <countyStateOrProvince> * A single optional <ISOcountryCode> o Up to 10 <phone> elements containing full E.164 numbers. o Up to 10 <fax> elements containing full E.164 numbers. o Up to 10 <email> elements. All elements directly under <tokendata> are optional. The <ISOcountryCode> element specifies the country using the alpha-2 country code from ISO 3166-1:2006 [11] (including updates published by the 3166 Maintenance Agency). The definition of the first five elements within the <address> element conforms to the second version of the E.115 Computerized Directory Assistance [17]. Lendl Standards Track [Page 5]
RFC 5105 ENUM Validation Token December 2007 5. Examples 5.1. Unsigned Token without Registrant Information This basic Token without any information about the Registrant and without the cryptographic signature shows the basic layout of the Token. <?xml version="1.0" encoding="utf-8" standalone="no" ?> <token xmlns="urn:ietf:params:xml:ns:enum-token-1.0" Id="TOKEN" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation= "urn:ietf:params:xml:ns:enum-token-1.0 enum-token-1.0.xsd"> <validation serial="acmeve-000002"> <E164Number>+442079460200</E164Number> <lastE164Number>+442079460499</lastE164Number> <validationEntityID>ACME-VE</validationEntityID> <registrarID>reg-4711</registrarID> <methodID>42</methodID> <executionDate>2007-05-08</executionDate> <expirationDate>2007-11-01</expirationDate> </validation> </token> 5.2. Signed Token This example uses an X.509 based signature that includes the certificate of the signing validation entity. Thus, the validity of the signature can be verified without the need for a key-server. A valid signature is a necessary, but not sufficient, condition for a valid Token. Any entity evaluating a Token needs to check other factors as well, e.g., the certificate and the XML schema. <?xml version="1.0" encoding="utf-8" standalone="no" ?> <token xmlns="urn:ietf:params:xml:ns:enum-token-1.0" Id="TOKEN" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation= "urn:ietf:params:xml:ns:enum-token-1.0 enum-token-1.0.xsd"> <validation serial="acmeve-000001"> <E164Number>+442079460123</E164Number> <validationEntityID>ACME-VE</validationEntityID> <registrarID>reg-4711</registrarID> <methodID>42</methodID> <executionDate>2007-05-08</executionDate> </validation> <tokendata xmlns="urn:ietf:params:xml:ns:enum-tokendata-1.0" xsi:schemaLocation= "urn:ietf:params:xml:ns:enum-tokendata-1.0 enum-tokendata-1.0.xsd"> Lendl Standards Track [Page 6]
RFC 5105 ENUM Validation Token December 2007 <contact> <organisation>Example Inc.</organisation> <commercialregisternumber>4711</commercialregisternumber> <title>Dr.</title> <firstname>Max</firstname> <lastname>Mustermann</lastname> <address> <streetName>Main</streetName> <houseNumber>10</houseNumber> <postalCode>1010</postalCode> <locality>London</locality> <countyStateOrProvince>London</countyStateOrProvince> <ISOcountryCode>GB</ISOcountryCode> </address> <phone>+442079460123</phone> <email>mm@example.com</email> </contact> </tokendata> <Signature xmlns="http://www.w3.org/2000/09/xmldsig#"> <SignedInfo> <CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> <SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256"/> <Reference URI="#TOKEN"> <Transforms> <Transform Algorithm= "http://www.w3.org/2000/09/xmldsig#enveloped-signature"/> <Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"> <InclusiveNamespaces xmlns="http://www.w3.org/2001/10/xml-exc-c14n#" PrefixList="enum-token enum-tokendata"/> </Transform> </Transforms> <DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256"/> <DigestValue >VxqsBxSNPFwPAUlCHts3g3DehcexnB1dqUz+GypLZ0k=</DigestValue> </Reference> </SignedInfo> <SignatureValue> QKqphKRNPokVZFbenje+HZZV+RLrNweGnlWBw7ngAtH+rtuslR8LhMLmC4DlBb9V HvKItl+7zLGm3VgYsqfHH8q3jCl1mFxUIuLlIPqtpJs+xAHAJDzZ+vmsF/q2IgrS K0uMmKuU5V1gydDBOvIipcJx+PrPYyXYZSjQXkWknK8=</SignatureValue> <KeyInfo> <X509Data> <X509Certificate> Lendl Standards Track [Page 7]
RFC 5105 ENUM Validation Token December 2007 MIIDZjCCAs+gAwIBAgIBBDANBgkqhkiG9w0BAQQFADB0MQswCQYDVQQGEwJBVDEP MA0GA1UEBxMGVmllbm5hMRQwEgYDVQQKEwtCT0ZIIENlcnRzLjEbMBkGA1UEAxMS Q0VSVFMuYm9maC5wcml2LmF0MSEwHwYJKoZIhvcNAQkBFhJjZXJ0c0Bib2ZoLnBy aXYuYXQwHhcNMDQwNzIwMTMxNTA5WhcNMDUwNzIwMTMxNTA5WjB/MQswCQYDVQQG EwJBVDEKMAgGA1UECBMBLTEPMA0GA1UEBxMGVmllbm5hMR0wGwYDVQQKExRBY21l IEVOVU0gVmFsaWRhdGlvbjEQMA4GA1UEAxMHYWNtZS1WRTEiMCAGCSqGSIb3DQEJ ARYTbm9ib2R5QGVudW0tYWNtZS5hdDCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC gYEArJPcjMFc54/zwztSdQXGxUtodJT9r1qGI2lQPNjLvtPJg93+7o5SIOsZGSpg zWbztDAV5qc7PHZWUVIyf6MbM5qSgQDVrjNRhTosNtyqmwi23BH52SKkX3P7eGit LmqEkiUZRxZhZ6upRbtcqvKSwmXitvW4zXZhkVHYJZ2HuMcCAwEAAaOB/DCB+TAJ BgNVHRMEAjAAMCwGCWCGSAGG+EIBDQQfFh1PcGVuU1NMIEdlbmVyYXRlZCBDZXJ0 aWZpY2F0ZTAdBgNVHQ4EFgQUyK4otTQtvv6KdSlMBOPT5Ve18JgwgZ4GA1UdIwSB ljCBk4AUvfPadpm0HhmZx2iAVumQTwgnG2eheKR2MHQxCzAJBgNVBAYTAkFUMQ8w DQYDVQQHEwZWaWVubmExFDASBgNVBAoTC0JPRkggQ2VydHMuMRswGQYDVQQDExJD RVJUUy5ib2ZoLnByaXYuYXQxITAfBgkqhkiG9w0BCQEWEmNlcnRzQGJvZmgucHJp di5hdIIBADANBgkqhkiG9w0BAQQFAAOBgQCB9CHBnIUhrdic4h5Ar4hdxjHSQkDH sJWd+MYrNcuSrv3TIOsUkUgNpNNhmkZPtiXqfy3388IRdJtJiLWXSOb/XlZHOM9I MvwKYwhcpQ9UdM/w7VpXQqf+CEj0XSyqxGw65UsHIOijgiG/WyhSj+Lzriw7CTge P2iAJkJVC4t2XA== </X509Certificate> </X509Data> </KeyInfo> </Signature> </token> 6. Formal Syntax The formal syntax of the validation token is specified using XML schema notation [7] [8]. Two schemas are defined: The "token core schema" contains mandatory attribute definitions, and the "token data schema" defines the format of the optional "tokendata" section. The BEGIN and END tags are not part of the schema; they are used to note the beginning and ending of the schema for URI registration purposes. Lendl Standards Track [Page 8]
RFC 5105 ENUM Validation Token December 2007 6.1. Token Core Schema BEGIN <?xml version="1.0" encoding="UTF-8"?> <schema targetNamespace="urn:ietf:params:xml:ns:enum-token-1.0" xmlns:enum-token="urn:ietf:params:xml:ns:enum-token-1.0" xmlns:enum-tokendata="urn:ietf:params:xml:ns:enum-tokendata-1.0" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"> <!-- Import common element types. --> <import namespace="http://www.w3.org/2000/09/xmldsig#" schemaLocation="xmldsig-core-schema.xsd"/> <import namespace="urn:ietf:params:xml:ns:enum-tokendata-1.0" schemaLocation="enum-tokendata-1.0.xsd"/> <annotation> <documentation> Validation Token core schema </documentation> </annotation> <element name="token" type="enum-token:tokenBaseType"/> <simpleType name="shortTokenType"> <restriction base="token"> <minLength value="1"/> <maxLength value="20"/> </restriction> </simpleType> <simpleType name="e164numberType"> <restriction base="token"> <maxLength value="20"/> <pattern value="\+\d\d*"/> </restriction> </simpleType> <complexType name="validationDataType"> <sequence> <element name="E164Number" type="enum-token:e164numberType"/> <element name="lastE164Number" minOccurs="0" type="enum-token:e164numberType"/> <element name="validationEntityID" Lendl Standards Track [Page 9]
RFC 5105 ENUM Validation Token December 2007 type="enum-token:shortTokenType"/> <element name="registrarID" type="enum-token:shortTokenType"/> <element name="methodID" type="enum-token:shortTokenType"/> <element name="executionDate" type="date"/> <element name="expirationDate" type="date" minOccurs="0"/> </sequence> <attribute name="serial" type="enum-token:shortTokenType" use="required"/> </complexType> <complexType name="tokenBaseType"> <sequence> <element name="validation" type="enum-token:validationDataType"/> <any namespace="urn:ietf:params:xml:ns:enum-tokendata-1.0" minOccurs="0"/> <any namespace="http://www.w3.org/2000/09/xmldsig#"/> </sequence> <attribute name="Id" type="ID" use="required"/> </complexType> </schema> END 6.2. Token Data Schema BEGIN <?xml version="1.0" encoding="UTF-8"?> <schema targetNamespace="urn:ietf:params:xml:ns:enum-tokendata-1.0" xmlns:enum-tokendata="urn:ietf:params:xml:ns:enum-tokendata-1.0" xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"> <element name="tokendata" type="enum-tokendata:tokenDataType"/> <simpleType name="E115String"> <restriction base="string"> <pattern value="[ -z -퟿-�]*"/> </restriction> </simpleType> <simpleType name="E115StringUb256"> <restriction base="enum-tokendata:E115String"> <minLength value="1"/> <maxLength value="256"/> Lendl Standards Track [Page 10]
RFC 5105 ENUM Validation Token December 2007 </restriction> </simpleType> <simpleType name="countryCodeType"> <restriction base="token"> <minLength value="2"/> <maxLength value="2"/> </restriction> </simpleType> <simpleType name="TokenType"> <restriction base="token"> <minLength value="1"/> <maxLength value="64"/> </restriction> </simpleType> <complexType name="addressType"> <all> <element name="streetName" minOccurs="0" type="enum-tokendata:E115StringUb256" /> <element name="houseNumber" minOccurs="0" type="enum-tokendata:E115StringUb256"/> <element name="postalCode" minOccurs="0" type="enum-tokendata:E115StringUb256"/> <element name="locality" minOccurs="0" type="enum-tokendata:E115StringUb256"/> <element name="countyStateOrProvince" minOccurs="0" type="enum-tokendata:E115StringUb256"/> <element name="ISOcountryCode" minOccurs="0" type="enum-tokendata:countryCodeType"/> </all> </complexType> <group name="tokenContactBaseGroup"> <sequence> <element name="organisation" minOccurs="0" type="enum-tokendata:E115StringUb256"/> <element name="commercialregisternumber" minOccurs="0" type="enum-tokendata:TokenType"/> <element name="title" minOccurs="0" type="enum-tokendata:TokenType"/> <element name="firstname" minOccurs="0" type="enum-tokendata:E115StringUb256"/> <element name="lastname" minOccurs="0" type="enum-tokendata:E115StringUb256"/> <element name="address" minOccurs="0" type="enum-tokendata:addressType"/> Lendl Standards Track [Page 11]
RFC 5105 ENUM Validation Token December 2007 <element name="phone" type="enum-tokendata:TokenType" minOccurs="0" maxOccurs="10" /> <element name="fax" type="enum-tokendata:TokenType" minOccurs="0" maxOccurs="10" /> <element name="email" type="enum-tokendata:TokenType" minOccurs="0" maxOccurs="10" /> </sequence> </group> <complexType name="contactType"> <sequence> <group ref="enum-tokendata:tokenContactBaseGroup"/> </sequence> </complexType> <complexType name="tokenDataType"> <sequence> <element name="contact" type="enum-tokendata:contactType"/> </sequence> </complexType> </schema> END 7. Other Applications of the Token Concept The concept of the validation token may be useful in other registry-type applications where the proof of an underlying right is a condition for a valid registration. An example is a Top Level Domain (TLD) where registration is subject to proof of some precondition, like a trade mark or the right in a name. Such situations often arise during the introduction of a new TLD, e.g., during a "sunrise" phase. A Number Portability (NP) database faces very similar verification issues. An NP system based on the Token concept could potentially be superior to current methods, and aid in the convergence of NP and ENUM. 8. IANA Considerations This document uses Uniform Resource Names (URNs) to describe XML namespaces and XML schemas conforming to a registry mechanism described in RFC 3688 [12]. IANA has made the following four URI assignments. Lendl Standards Track [Page 12]
RFC 5105 ENUM Validation Token December 2007 1. Registration for the Token namespace: * URI: urn:ietf:params:xml:ns:enum-token-1.0 * Registrant Contact: See the "Author's Address" section of this document. * XML: None. Namespace URIs do not represent an XML specification. 2. Registration for the Token XML schema: * URI: urn:ietf:params:xml:schema:enum-token-1.0 * Registrant Contact: See the "Author's Address" section of this document. * XML: See Section 6.1 of this document. 3. Registration for the Token Data namespace: * URI: urn:ietf:params:xml:ns:enum-tokendata-1.0 * Registrant Contact: See the "Author's Address" section of this document. * XML: None. Namespace URIs do not represent an XML specification. 4. Registration for the Token Data XML schema: * URI: urn:ietf:params:xml:schema:enum-tokendata-1.0 * Registrant Contact: See the "Author's Address" section of this document. * XML: See Section 6.2 of this document. The IDs used in the validationEntityID, RegistrarID, and methodID elements are subject to local policy and thus do not require IANA registration. 9. Security Considerations The security of the Validation Token depends on the security of the underlying XML DSIG algorithms. As such, all the security considerations from [4] apply here as well. Two points from [4] merit repetition: Transforms are used to select the relevant data for signing and discarding irrelevant information (e.g., pretty-printing and name-space local names). The <Reference URI="#TOKEN"> element and attribute combined with the Id="TOKEN" attribute in <token> specifies that the signature should cover the complete token. Moving the Id="TOKEN" attribute to e.g., the <tokendata> element would make the signature worthless. Lendl Standards Track [Page 13]
RFC 5105 ENUM Validation Token December 2007 It is thus critical that the Registry not only checks whether the Token passes a generic XML-DSIG signature check, but also that: 1. the signature uses approved transforms and cryptographic algorithms. 2. the signature references the <token> element. 3. the key used in the signature belongs to an accredited VE. The Token content is not encrypted. If local policy dictates that the information contained within the token should be confidential, then this has to be handled through a different mechanism. When processing a delegation request, the Registry MUST verify that the information contained in the Token matches the delegation request. The <registrarID> element in the Token prevents a malicious second Registrar from using an eavesdropped Token to register a domain in his name. The Registry MUST verify that the <expirationDate> given (including the case of no given expiration date) conforms to the Registry's policy. To avert replay attacks, local policy MUST specify how long after <executionDate> the Token can be used to authorize a delegation. 10. Acknowledgements The author would like to thank the following persons for their valuable suggestions and contributions: Michael Haberler, Alexander Mayrhofer, Bernie Hoeneisen, Michael Braunoeder, Staffan Hagnell, Lawrence Conroy, and Tony Rutkowski. 11. References 11.1. Normative References [1] Faltstrom, P. and M. Mealling, "The E.164 to Uniform Resource Identifiers (URI) Dynamic Delegation Discovery System (DDDS) Application (ENUM)", RFC 3761, April 2004. [2] ITU-T, "The international public telecommunication numbering plan", Recommendation E.164, May 1997. [3] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [4] Eastlake 3rd, D., Reagle, J., and D. Solo, "(Extensible Markup Language) XML-Signature Syntax and Processing", RFC 3275, March 2002. Lendl Standards Track [Page 14]
RFC 5105 ENUM Validation Token December 2007 [5] Eastlake 3rd, D., "Additional XML Security Uniform Resource Identifiers (URIs)", RFC 4051, April 2005. [6] Klyne, G. and C. Newman, "Date and Time on the Internet: Timestamps", RFC 3339, July 2002. [7] Maloney, M., Beech, D., Mendelsohn, N., and H. Thompson, "XML Schema Part 1: Structures", W3C REC REC-xmlschema-1-20010502, May 2001. [8] Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes", W3C REC REC-xmlschema-2-20010502, May 2001. [9] Eastlake, D., Boyer, J., and J. Reagle, "Exclusive XML Canonicalization Version 1.0", W3C REC REC-xml-exc-c14n- 20020718, July 2002. [10] International Telecommunications Union, "Information technology - Open Systems Interconnection - The Directory: Public-key and attribute certificate frameworks", ITU-T Recommendation X.509, ISO Standard 9594-8, March 2000. [11] International Organization for Standardization, "Codes for the representation of names of countries and their subdivisions -- Part 1: Country codes, 2nd edition", ISO Standard 3166, November 2006. [12] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004. 11.2. Informative References [13] Hollenbeck, S., "Extensible Provisioning Protocol (EPP)", RFC 4930, May 2007. [14] Schaad, J., Kaliski, B., and R. Housley, "Additional Algorithms and Identifiers for RSA Cryptography for use in the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 4055, June 2005. [15] Mayrhofer, A. and B. Hoeneisen, "ENUM Validation Architecture", RFC 4725, November 2006. [16] Hoeneisen, B., "ENUM Validation Information Mapping for the Extensible Provisioning Protocol", RFC 5076, December 2007. [17] ITU-T, "Computerized Directory Assistance Version 2", Recommendation E.115v2, October 2005. Lendl Standards Track [Page 15]
RFC 5105 ENUM Validation Token December 2007 Author's Address Otmar Lendl enum.at GmbH Karlsplatz 1/2/9 Wien A-1010 Austria Phone: +43 1 5056416 33 EMail: otmar.lendl@enum.at URI: http://www.enum.at/ Lendl Standards Track [Page 16]
RFC 5105 ENUM Validation Token December 2007 Full Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Lendl Standards Track [Page 17]